6 Stage Reverse Osmosis Water Purification System 35 GPD

Stage 1) 5 micron polypropylene sediment pre-filter --- to extract suspended materials such as sediments, insects, asbestos fiber, rust and particles down to 5 micron.

Stage 2) 1 micron polypropylene sediment filter (Well water configuration) Or Same as stage 3. For municipal water.

Stage 3) 2nd Granular Activated Carbon (GAC) filter. This filter is designed to absorb heavy chlorine and chlorine byproducts such as chloramine, trihalomethanes THM, and TCE along with pesticides, industrial solvents (halogenated hydrocarbons), polychlorinated byphenols (PCB's), radon gas and other volatile organic chemicals. Its life is dependant on the amount of polutants that come in contact with it.

Stage 4) High rejection 35 GPD (95-99%) Thin Film Composite (TFC) RO membrane to reject wide spectrum of impurities including Total Dissolved Solids (TDS), bacteria and viruses down to .0001 micron. The product water is stored in the storage tank, while the reject water is automatically flushed down the drain.

Stage 5) In-line GAC filter to remove dissolved gases, bad taste and odour from product water. This is the final polishing stage

Stage 6) In-line UV Lamp Sterilizer, stainless steel inner jacket, flow rate 1 GPM UV Light rated for 8000 hours

Comes with Bar Tap, Wrench, and installation kit.

The filtration unit and storage tank mount under your sink, out of sight. Water supply is gained by attaching a simple saddle valve to your cold water supply pipe (copper or plastic). You will have to drill a hole in your countertop or sink frame to attach the attractive stainless chrome-plated faucet. It is a relatively easy do-it-yourself project, or if you prefer, you can have it installed by a handyman or plumber. The unit includes all installation hardware and a complete installation guide.

Please click here to contact us to determine proper set-up for your water system before purchasing.